| Model | CCT-8320 | |||
| Signal detection（seven channels） | Dry contact input | Raw water tank level：double channels | Low level | |
| High level | ||||
| Pure water tank level:double channels | Low level | |||
| High level | ||||
| Low pressure protection | ||||
| High pressure protection | ||||
| Pretreatment backwash signal | ||||
| Control port（five channels） | Dry contact output | |||
| Raw water pump | SPST-NO； Load capacity： AC 220V/3A Max； AC 110V/5A Max； DC 24V/3A Max |
|||
| lnlet valve | ||||
| High pressure pump | ||||
| Flush vavle | ||||
| Conductivity voerlimit drainge valve | ||||
| Measure detection points | Raw water conductivity、product water conductivity、raw water Temp. | |||
| Measurement range | Raw water conductivity | Measurement range | 5～4000μS /cm | |
| Conductivity Cell constant | 1.0cm-1 | |||
| Product water conductivity | Measurement range | 2～200μS /cm | ||
| Conductivity Cell constant | 1.0cm-1 | |||
| Medium Temp. | 0～50℃ | |||
| Accuracy | 1.5%（FS） | |||
| Communication | RS485 communication（Modbus protocol） | |||
| Work Environment | Temp：0～50℃ relative humidity：≤85%RH （none condensation） | |||
| Storage Environment | Temp：-20～60℃;relative humidity：≤85%RH（none condensation） | |||
| Power supply | DC24V±4 V | |||
| Protection level | IP65（with back cover） | |||
| Dimensions | 130mm×180mm×60mm（H×W×D） | |||
| Hole size | 122mm×172mm（H×W） | |||
| Installation | Panel mounted,fast installation | |||
Otros
Controlador de Ósmosis Inversa CCT-8320
Controlador de RO de integración de canales dobles de una etapa con medidor de conductividad y el control del programa de procesos.
[popup_anything id=”12923″ class=”arrow”]
